Bva-hydraulics HP1006 Manuale Utente Scaricare il pdf (Pagina 2)

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read and understand the

information contained within. The owner and operator shall have an

understanding of this product and safe operating procedures before

attempting to use this product. Instructions and safety information

shall be conveyed in the operator’s native language before use of

this product is authorized. Make certain that the operator thoroughly

understands the inherent dangers associated with the use and

misuse of the product. If any doubt exists as to the safe and proper

use of this product as outlined in this factory authorized manual,

remove from service immediately.

Inspect before each use. Do not use if leaking, broken, bent,

cracked or otherwise damaged parts are noted. If the cylinder has

been or suspected to have been subjected to a shock load (a load

dropped suddenly, unexpectedly upon it), discontinue use until

checked out by a BVA Hydraulics authorized service center. Owners

and operators of this equipment shall be aware that the use and

subsequent repair of this equipment may require special training

and knowledge. It is recommended that an annual inspection be

done by qualied personnel and that any missing or damaged

parts, decals, warning/safety labels or signs be replaced with BVA

Hydraulics authorized replacement parts only. Any cylinder that

appears to be damaged in any way, is worn or operates abnormally

shall be removed from service immediately until such time as repairs

can be made.

PRODUCT DESCRIPTION

BVA Hydraulics Single Acting Pull Cylinder is designed for rated

capacity pulling jobs. A wide variety of applications exist for this

category of product. Special skill, knowledge and training may be

required for a specic task and the product may not be suitable

for all the jobs described above. Unsuitable applications would

include applications that call for a device to move, level or support

persons, animals, hazardous materials, mobile homes/dwellings

in general, mirrors and/or plate glass, and/or to connect/secure

hatches, components, etc. between bulkheads. The user ultimately

must make the decision regarding suitability of the product for any

given task and therefore accept responsibility for that decision.

Immediately after lifting, loads must be supported by appropriate

mechanical means.

WARNING: NEVER use hydraulic cylinder as a

support device.

WARNING: Always check connections before using.

Alteration of these products is strictly prohibited. Use only

those adapters and attachments provided and approved by

the manufacturer.

WARNING: To reduce the risk of personal injury and/or

property damage, ensure that the rated working pressure of

each pressurized attachment be equal to or greater than the

rated working pressure developed by the hydraulic pump.

BEFORE USE

1. Before using this product, read the owner's manual completely

and familiarize yourself thoroughly with the product, its

components and recognize the hazards associated with its use.

2. Verify that the product and the application are compatible. If in

doubt, call BVA Hydraulics Technical Service (888) 332-6419.

3. Inspect before each use. Do not use if bent, broken, leaking or

damaged components are noted.

Replace worn or damaged parts and assemblies with BVA

Hydraulics authorized replacement parts only. Lubricate as

instructed in Maintenance Section.

5. Ensure method of conrming load is accurate and working

properly. Have gauge or load cell accuracy veried by qualied

personnel on a yearly basis.

Figure 1 - Typical Cylinder Components

Threaded Adapter

Collar Protecting Cap

Cylinder Housing

Female Coupler,

3/8”-18NPTF

Dust Cover

Ram Plunger

Base Mounting Hole

(not shown)

1 2 3 4 5 6 7 ... 23 24

Commenti su questo manuale

Nessun commento

Bva-hydraulics HP1006 Manuale Utente Pagina 2

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature Bva-hydraulics HP1006